Limestone rotary kiln
Use of lime
The uses of lime are very wide. Common in construction, building materials, metallurgy, chemical, light industry, environmental protection, medicine and agriculture and many other fields. Especially in steelmaking, ironmaking, sintering, copper, aluminum smelting and other industries, lime as slagging agent, dissolving agent or sintering material
Share This Product:
  • Equipment Overview
  • specification
  • Customer case
As a kiln for calcination of active lime, with the development of iron and steel smelting technology, the long-term production practice shows that the limestone rotary kiln not only meets the needs of iron and steel smelting, but also fully embodies its superiority in large-scale industrial production and the prospect of sustainable development in other metallurgical industries.
Active lime products are widely used as slagging agent in iron and steel enterprises, especially in converter steelmaking. It plays a very important role in shortening smelting time, improving product quality, optimizing smelting technology and improving economic benefits.
Equipment composition
The dangerous waste rotary kiln is composed of cylinder body, wheel belt, supporting wheel, retaining wheel, transmission device and sealing device of kiln head and kiln tail.
Lime rotary kiln technology
Qualified limestone is stored in the hopper, which is lifted by the hoist and transported to the top hopper of the preheater. The top bin of the preheater is controlled by the upper and lower two level gauges, and then the limestone is evenly distributed to each room of the preheater through the blanking pipe.
The limestone is heated to about 900°C by 1150°C kiln flue gas in the preheater, about 30% of which is decomposed and pushed into the rotary kiln by hydraulic push rods. The limestone is sintered into CaO and CO2 in the rotary kiln. The limestone formed after decomposition enters the cooler, where it is cooled to 100°C by the cold air pumped in and discharged. The hot air at 600°C through heat exchange enters the kiln and the gas is mixed for combustion. The waste gas is mixed into the cold air through the induced draft fan into the bag filter, and then through the exhaust fan into the chimney.
The lime from the cooler is sent into the finished product warehouse by vibrating feeder, chain bucket conveyor, bucket elevator and belt conveyor. Whether to carry out screening and other processes according to customer requirements.
Lime rotary kiln technology advanced, simple structure, low pressure loss preheater can effectively improve the preheating effect, after preheating limestone into the kiln decomposition rate can reach 20-25%, effectively improve the output of rotary kiln, reduce the heat consumption. And can be directly calcined using 20-60mm fine limestone. In addition to the conventional production line, we also have high-end configuration of six pusher preheater, eight pusher preheater, ten pusher preheater, twelve pusher preheater.
Design capability 150 200 250 300 350 400 500 600 750 800 1000
product Activated lime light burnt dolomite Active lime
Rotary kiln specifications(m Φ2.5x40 Φ2.8x42 Φ3x46 Φ3.2x50 Φ3.5x54 Φ3.6x5 Φ3.8x58 Φ4.2 Φ4.3x58 Φ4.3x64 Φ4.8x68
Effective volume(m³) 142 190 235 292 390 430 505 575/ 670 738 1005
Combustion temperature 1350/ 1350/ 1350/ 1350/ 1350 1350 1350 1350 1350 1350 1350
1250 1250 1250 1250
2 production lines of 600 tons of dangerous waste kilns per day in Gansu
Feedback from contact with us
Related Product
Cement rotary kiln
Cement rotary kiln
Summary of the equipment Cement rotary kiln belongs to building materials equipment class, is a kin...
Learn More>
Pellet rotary kiln
Pellet rotary kiln
Equipment Overview The pellets are roasted and consolidated in a rotary kiln. Normal reside...
Learn More>
Rotary kiln
Rotary kiln
Product introduction Rotary kiln can be divided into cement kiln, metallurgical chemical kil...
Learn More>
Product Catalog
Phone call